KG3-26-BEA Beabadoobee 2026 - CTRL C
IP: 192.168.41.43 / 255.255.255.0
Gateway: 192.168.41.1
Protocol: sACN (E1.31)
Pixel type: WS2811 / RGB / RGB color order / 800 kHz / 3 ch per px / 170 px per universe
Outputs: 4 (expand OFF); unused outputs set to 0 pixels
Firmware: PixLite Mk3 3.15.0 / management API v1.9 (this .conf is the v1.9 format; do not load it on firmware below 3.14.0)

Output starts:
Output 1: 64.1 | 98 px | USR1-1 = USR1-1 | ends 64.294
    USR1-1   16'0"    98 px  run px 1-98  64.1 - 64.294
Output 2: 65.1 | 98 px | USR1-2 = USR1-2 | ends 65.294
    USR1-2   16'0"    98 px  run px 1-98  65.1 - 65.294
Output 3: 66.1 | 98 px | USR1-3 = USR1-3 | ends 66.294
    USR1-3   16'0"    98 px  run px 1-98  66.1 - 66.294
Output 4: unused (0 px)

Verify the physical pixel color order with the controller test pattern before show. The Aug 14 bench test on this
product did not record the order; RGB is the default here.

Advatek Assistant 3 import: Patching > Patching Options: Data Source = sACN (E1.31) (sACN numbering starts at 1, so
41 means 41). "Pixels can be split across universes" = OFF. Auto Patch ON from Output 1's start above. The .conf uses
generic output descriptions for firmware compatibility; the segment names live in this README and the CSV.
Alternative to Assistant: from the Mini, `node pxl.js <ip> import <this .conf>` then `node pxl.js <ip> save` (see LOAD-LOG).
Controller label: print from NeonOS (os.kg3.io/neon/54cf8685-c57b-4fd4-be7e-13662667abe2/labels).